Description
This is a 27.5″ Shimano Altus Rapid Fire Plus 8 speed Alloy Electric Mountain Bike with the Bafang MAX-01 Electric Drive System. The Progear E-Shock is a pedal assist bike using the acclaimed Bafang MAX-01 E-Bike system. The 36v/11.6 AH Phylion battery has Panasonic cells and as the matched Phylion charger complies to all required standards. The Alloy frame is available in three sizes, 16.5″, 18.5″ and 20.5″ ensuring a good fit for cyclists of all sizes and requirements.
Features:
– The 27.5″ tyres roll over obstacles more easily, have a smoother ride uphill or down, provide more traction and once moving are easier to stay moving.
– In short, they will take you anywhere, and the extra power from the Bafang electric motor will get you there and back again.
– Reliable Tektro Cable Disc brakes provide all the stopping power needed
– The alloy frame, rims and components make the Progear E-Shock light weight but with the strength where needed.
– The Mid Drive Bafang motor is 26v/250w and limited to 25km/h ensuring Australian Standards compliance.
– Mid drive motor powers through the drivetrain (transmission) of the bike which enables the motor to help with long & steep climbs and power up to high speeds on flat roads.
– The lower centre of gravity also provides better handling, easier to lift on and off a bike rack and removal of either wheel is easier.
Travel distance on our Electric Bikes:
The travel distance after a full charge on this e-Bike can vary from 30km to 50km.
There are several factors that will affect how long the battery will last after a full charge.
Factors include:
– Level of pedal assistance – higher level of assistance will use more battery charge
– Weight of Rider & Luggage – more weight may require more power from the battery
– Terrain & Weather Conditions – Terrain & wind may cause drag, and will require more power to maintain speed.
– Tyre Conditions – Incorrect tyre pressure may create more rolling resistance
– Traffic/Route Conditions – Stop/Start cycling may use more power to accelerate up to appropriate travelling speeds.
Specification
Technical Information
Frame | Alloy X6 27.5″ x 16.5″, 18.5″ & 20.5″ HT:46/42*58. 1/52.1*110mm Width:135mm RC:465mm |
---|---|
Handlebars | Alloy W:680mm 5° H25mm 31.8mm |
Right Shifter | Shimano Altus M310 Rapid Fire Plus 8-SP 2050mm |
Suspension Fork | SR-Suntour XCT HLO-DS27.5 , Front Suspension Pre-Load Adjustable Coil, 27.5 x 28.6 x 25.4 x 187mm with HLO Lock-Out 100mm |
Rear Derailleur | Shimano Altus M310 8-SP Index |
Brakes | Tektro Disc Brake. F/R Disc brake F/R: 160mm. Black Alloy Lever |
Front Hub | Quando Alloy One Piece Forged with Disc Brake Mount and Quick Release. 14G × 36H M9 × 100 × 108mm |
Rear Hub | Quando Alloy One Piece Forged with Disc Brake Mount and Quick Release. 14G × 36H M10 × 135 × 145mm 8 SP |
Headset | FSA Alloy 28.6×41.8-51.8×30mm H2166B 15mm H=16.3mm |
Pedal | VP Steel Cage, 9/16 CR-MO axle |
Grip | Rubber 130mm |
Saddle | Velo Comfort Double Density, Chromoly Rails, ArcTech Zone Cut with Alloy Clamp |
---|---|
Chain Wheel & Crank-set | Bafang 3/32 x 38T with Alloy 170mm Cranks |
Chain | KMC 1/2 × 11/128 116L 8-SP |
Wheels | Alloy Rims, Steel QRF Hubs, 26 x 2.125 Tyres |
Tyre | 27.5″× 2.1″ 60TPI A/V |
Rim | Alloy 27.5 × 584 × 19 × 14G × 36H A/V |
Spacer | 35.2×29×5mm |
Cover | 1-1/8″ 25.4mm W/O LOGO |
Stem | 28.6mm E:90mm H:43mm 7° 31.8mm W/O LOGO |
Freewheel | Shimano Acera CS-HG300 11-34T 8-SP index |
Available Colours | Black |
Warranty | Lifetime warranty on frame and fork & 12 month warranty on electrical components |
Sizes | 16″, 18″, 20″ |
Bell | Nuvo Allo & Plastic Bell |
Electrical Components
Motor | Bafang MAX-01 Drive System. 36V/250W, Limit 25km/h, CL:49mm, With controller, With battery communication, AU. Complies to EN 15194:2009+A1, Annex C |
---|---|
Display | Bafang LCD Display, DC 36V, 0-5 Modes, UART communication, With Walk Boost, With light switch |
Battery | Phylion 36V/11.6Ah, Panasonic 2900mAh cell, With Intelligent protection board,With communication, AU. Tested to UN recommendations on the transport of dangerous goods, manual of tests and criteria. Part 111, sub-section 38.3, Rev. 5 |
Speed Sensor | Sensor, 1 Pulse, 5V, 500mm |
---|---|
Charger Information | Phylion GS CE 100-240V 1.6A(MAX)50/60HZ Output:42V 2A AU. Complies to EN 60335-1, EN 60335-2, EN 62233:2008, GS 2104:01 |
Electric Bike Battery Information
The travel distance after a full charge on this e-Bike can vary from 30km to 70km.
There are several factors that will affect how long the battery will last after a full charge.
- Factors include:
- Level of pedal assistance – higher level of assistance will use more battery charge
- Weight of Rider & Luggage – more weight may require more power from the battery
- Terrain & Weather Conditions – Terrain & wind may cause drag, and will require more power to maintain speed.
- Tyre Conditions – Incorrect tyre pressure may create more rolling resistance
- Traffic/Route Conditions – Stop/Start cycling may use more power to accelerate up to appropriate travelling speeds.
Assembly Details
All Bikes come approx. 80% assembled in the box. All you have to do is install the front wheel & brakes, attach your handlebars, insert the seatpost and attach the pedals. Brakes and gears may need adjustment prior to riding.
While assembly is a fairly simple process, please bear in mind that our warranty does not cover damage caused by incorrect assembly, so if you’re not confident assembling the bike yourself, we do recommend that you have your local bike shop assemble it for you.
We have assembly video tutorials covering most of our bikes: https://ebikespro.com.au/pages/product-videos
Reviews
There are no reviews yet.